3/32" x 14" E6011 "Rust Resolver" Stick Electrode Job Pack, 1/2 Lbs

Forney® E6011 "Rust Resolver" are all position, deep penetration adverse conditions mild steel electrodes. Job pack - 1/2 Lbs (0.23 Kg). They are ideally suited for difficult maintenance repairs and are excel on rusty, greasy, poor fitting joints in all positions. E6011 easily welds steels that have been galvanized, painted, rusted, or otherwise contaminated in service. They are easy to use out of position and can bridge gaps as wide as 3/8" (9mm). The slag can be welded over without removal.

Welding Techniques: Weld with a short to medium arc length at low amperage. When surface preparation is impratical, use a medium to long arc and favor high amperages. Multi-pass welds can be made without intermittent slag removal. Use any welding technique from stringer bead to wide weave.

SPECIFICATIONS

• AWS / ASME: A 5.1 E6011
• ELECTRODE DIAMETER: 3/32 In (2.38mm)
• ELECTRODE LENGTH: 14 In (355.6mm)
• PACKAGE QUANTITY: 1/2 Lbs (0.23 Kg) Job Pack
• PACKAGING: Plastic container
• TYPICAL MECHANICAL PROPERTIES:
• TENSILE STRENGTH: 80,000 PSI (570 MPa)
• YIELD STRENGTH: 72,000 PSI (510 MPa)
• ELONGATION: 28%
• IMPACT ENERGY: 70J: -4° F (-20° C)
• RECOMMENDED CURRENT: DC Reverse (+), Straight (-), or AC
• MINIMUM - MAXIMUM AMPERAGE: 25 - 75
• WELDING POSITIONS: Flat, vertical up, vertical down, horizontal, overhead
• MINIMUM ORDER QUANTITY: Each
• ORDER QUANTITY: 10
• WARRANTY: Limited 30-Days (Free of defects in material and workmanship that may occur under normal use and care)

30 Days

• Product: Free of defects in material and workmanship that may occur under normal use and care.