1/16" x 36" ER309L Stainless Steel TIG Electrodes, 1 Lbs

Forney® ER309L stainless steel TIG electrodes for joining stainless steels to carbon or low alloy steels where the corrosion resistance is of secondary importance.

Welding Techniques: Maintain a close arc gap and move rapidly in the direction of travel. Slag can be welded over without removal.

SPECIFICATIONS

• AWS / ASME: A5.9 ER309L
• ELECTRODE DIAMETER: 1/16 In (1.59mm)
• ELECTRODE LENGTH: 36 In (914.4mm)
• PACKAGE QUANTITY: 1 Lbs (0.45 Kg)
• PACKAGING: Plastic container
• TYPICAL MECHANICAL PROPERTIES:
• TENSILE STRENGTH: 87,000 PSI (600 MPa)
• YIELD STRENGTH: 58,000 PSI (400 MPa)
• ELONGATION: 40%
• IMPACT ENERGY: 100 Ft-Lb (136J)
• HARDNESS: Brinell 160, Rockwell B85
• RECOMMENDED CURRENT: DC- (Argon or helium gas should be used to minimize burn-off of the tungsten electrode)
• MINIMUM - MAXIMUM AMPERAGE: 35 - 60
• MINIMUM ORDER QUANTITY: Each
• ORDER QUANTITY: 2
• WARRANTY: Limited 30-Days (Free of defects in material and workmanship that may occur under normal use and care)

30 Days:

• 30 Days: Product: Free of defects in material and workmanship that may occur under normal use and care.