Soap Nozzle, Black, 65 Degrees x 4.0 mm
DESCRIPTION
Brass Soap / Chemical (black color coded) pressure washer spray nozzle with 4.0mm orifice and 1/4 in (6.35mm) Quick Connect (QC) plug. Soap (black) QC spray nozzles have a low pressure 65 degree spray pattern for applying cleaning solutions. The low pressure spray is safe on all surfaces. The wide spray angle allows an even and broad application of the soap or chemicals. ALWAY CHECK THE COMPATIBILITY OF THE CLEANING SOLUTION PRIOR TO USE. The orifice size of the nozzle determines the operating pressure of the end-user's machine. Generally, the smaller the orifice, the greater the restriction of water flowing through the pressure washer. This causes the pressure to increase. Choosing a nozzle with too large an orifice will reduce operating pressue. Choosing a nozzle with too small of an orifice will limit water flow and possibly create an excessive load on the pressure washer. Determining the correct spray nozzle orifice size is dependent on the Gallons Per Minute (GPM) and Pressure per Square Inch (PSI) ratings of the pressure washer being used. As a general rule, QC spray nozzles with 4.0mm orifices work best on pressure washers rated between 500 PSI with 1.4 GPM (low end) to 8,000 PSI with 5.7 GPM (high end). For pressure washers inbetween the low end and high end, the recommended orifice size is roughly proportional from low end to high end. The spray nozzle is designed to easily connect to a 1/4 in (6.35mm) QC coupler and is ideal for quick exchange of spray nozzles and spray guns. It connects to all of the most common pressure washer equipment in the industry.
SPECIFICATIONS
- Fitting: QC spray nozzle
- Material: Stainless Steel
- Spray Nozzle: 65° soap
- Color-Coding: Black
- Nozzle Connection: 1/4 inch (6.35 mm) Quick Connect
- Orifice: 4.0 mm
- Maximum Temperature: 300° F (148.9° C)
- Maximum Working Pressure: 4,000 PSI
WARRANTY
30 Days:
- 30 Days: Product: Free of defects in material and workmanship that may occur under normal use and care.