.030" ER70S-6 Copper Coated Carbon Steel MIG Welding Wire, 33 Lbs

Forney® ER70S-6 copper coated carbon steel MIG welding wire produces excellent welding results on mild steels where poor fit-up, rust, and oils may be present. ER70S-6 is often used on mild / low alloy steels in applications, not limited to: sheet metal, bridges / pipes, ship building, auto industry / repair, and all industries / fabrications of mild steels. This wire contains high levels of manganese and silicon for stronger deoxidizing power. ER70S-6 wire can be used in manual, semi-automatic or automatic welding operations using pulse, spray transfer, or short circuit transfer with many gases such as 100% CO2, 75%-95% Ar/15%-25% CO2, and 95%-98% Ar/2%-5% O2.

SPECIFICATIONS

• AWS / ASME: A5.18 ER70S-6
• WIRE DIAMETER: 0.030 In (0.76mm)
• WIRE SIZE: 33 Lbs (14.97 Kg)
• PACKAGING: Plastic spool
• TYPICAL GAS METAL ARC WELDING (GMAW) PROCEDURES: DCEP Short Circuit
• WIRE SPEED (INCHES PER MINUTE): 110 - 340 IPM
• AMPERAGE RANGE: 40 - 130
• VOLTAGE RANGE: 15 - 20
• TRAVEL SPEED (INCHES PER MINUTE): 12 - 24 IPM
• CO2 FLOW RATE (CUBIC FEET PER HOUR): 20 - 25 CFH
• TYPICAL WELD METAL PROPERTIES (AWS SPEC // TYPICAL): 100% CO2
• TENSILE STRENGTH (PSI): 70,000 PSI // 80,380 PSI
• YIELD STRENGTH (PSI): 58,000 PSI // 66,587 PSI
• ELONGATION IN 2 IN (50.8MM): 22% // 24.2%
• CHARPY V-NOTCH AT -20° F (X° C): 20 Ft-Lbs/Min // 28 Ft-Lbs/Min
• REDUCTION OF AREA: N/A // 58%
• AVERAGE BRINELL HARDNESS: N/A // 171
• SHIELDING GAS REQUIRED: Yes (100% CO2, 75-95% Argon/15-25% CO2, 95-95% Argon/2-5% O2)
• MINIMUM ORDER QUANTITY: Each
• ORDER QUANTITY: 2
• WARRANTY: Limited 30-Days (Free of defects in material and workmanship that may occur under normal use and care)

30 Days:

• 30 Days: Product: Free of defects in material and workmanship that may occur under normal use and care.