E71T-GS Self, Steel Flux-Core Welding Wire, .030 in x 10 Pound
DESCRIPTION
This E71T-GS Self flux-core welding wire for mild steel is ideal for all-position welding, and best suited for single pass applications with high travel speed. Pink color coding on label. No shielding gas required.
SPECIFICATIONS
- No shielding gas required
- Recommended polarity: DCEN straight
- Weight: 10 lbs. (4.54 kg)
- Diameter (Inches): .030 in
- Tensile Strength (PSI): 79,000
SELF-SHIELDED
- This all-position flux-core wire is self-shielded, making it ideal for work on rusty, dirty and painted material.
MODERATE TO LOW SPATTER
- This wire produces moderate to low spatter. Using an Argon/CO2 mix will reduce spatter.
RUNS HOTTER
- Forney's E71T-GS Self wire runs hotter than solid wires. This makes it best suited for single pass applications with high travel speed.
EXCELLENT FOR OUTDOOR USE
- Because this wire does not require shielding gas, it is ideal for outdoor welding. Wires that do require gas run the risk of wind blowing the gas away, ultimately resulting in porosity.
RESOURCES
WARRANTY
30 Days:
- 30 Days: Product: Free of defects in material and workmanship that may occur under normal use and care.
Ratings & Reviews
2 reviews
02/13/2023 1:47 pm
wont weld right
by larry
This wire just doesn't seem to burn right in my miller and in my lincoln
04/12/2023 6:40 pm
Great Wire!!!
by QUINN
Great flux core wire. Fits in my little flux core machine. Definitely welds better than the Vulcan wire that was in it before - spatter through the roof. This is the best wire for installing frame stiffeners on a Jeep XJ.