Battery Charger, 6V at 2, 10, and 20 AMPs / 12V at 2, 10, 20, and 100 AMPs Start

Portable and easy to use! This battery/trickle charger is also commonly referred to as a "bench charger." Features LED indicators and button controls for easy reading and accuracy. It can charge both a 6-volt and/or a 12-volt battery at 2 amps (trickle), 10 amps (standard) and 20 amps (quick charge). At 12-volts, this bench charger also has a 100 amp Engine Start charging capability. Using the 100 amps emergency start setting is powerful enough to bring cars, SUVs and small trucks back to life!

SPECIFICATIONS

• ETL certified
• Recessed control panel protects against accidental setting changes. Features LED indicators and button controls for easy reading and accuracy.
• Voltage: 6-volts and 12-volts
• Spark proof for safe operation
• Operation: 6-volt and/or a 12-volt battery at 2 amps (trickle), 10 amps (standard) and 20 amps (quick charge). At 12-volts, this bench charger also has a 100 amp Engine Start charging capability.
• Suitable for Absorbed Glass Mat (AGM), GEL and standard (STD) batteries
• Automatic charge cycle functionality switches to float mode after fully charging the battery
• Short circuit, overheat and reverse polarity protection will not operate if clamps are reversed
• Charger will enter repair mode if a rapid drop in voltage is detected
• Easy to use! An error notification will light up if a bad connection is detected
• 13.6-Volt Power Supply Mode: Provides DC power supply for powering any 12-volt device (e.g., a tire inflator) or as a memory retainer when replacing a battery
• Active Charging Indicator: Cycles between volts, amps and battery percent
• Auto Amperage Detection: Detects best amperage (cycling between trickle and quick or vice-versa) based on battery condition
• Wrap cleats provide convenient cord storage

GLOSSARY OF TERMS

• ETL certified: This product is compliant with North American safety standards.
• Absorbed Glass Mat (AGM) battery: Use a glass mat to absorb the electrolyte. These batteries are sealed (vs. flooded), resistant to vibration, non-spillable and maintenance-free.
• GEL battery: Gelling agent is added to the electrolyte to reduce movement inside the battery case. Many gel batteries also use one-way valves to reduce gassing.
• Light-emitting diode (LED): LED lights typically last longer than incandescent lights and are more efficient than most fluorescent lights.

Forney Industries green color is a trademark of Forney Industries and cannot be reproduced unless authorized by Forney Industries.

30 Days

• Product: Free of defects in material and workmanship that may occur under normal use and care.

90 Days

• Forney Battery Chargers: Parts & Labor: All components and parts outside the battery charger cover, including but not limited to cables and clamps. Knobs, wheels and axle are not covered.

3 Years

• Forney Battery Chargers: All internal electrical components that cannot be accessed without removing the cover.

5 Years

• Forney Transformer Based Machines: Transformers and rectifiers.

For more warranty information, visit:Forney Industries Warranty Information