1/8" x 14" E6010 Deep Penetrating Stick Electrodes, 10 Lbs

Forney® E6010 are adverse conditions mild steel stick electrodes. They are ideally suited for difficult maintenance repairs and excel on rusty, greasy, poor fitting joints in all positions. E6010 easily welds steels that have been galvanized, painted, rusted or otherwise contaminated in service. Misaligned parts or difficult to access areas are also easily remedied with these electrodes. E6010 can weld through 1/2" (12mm) of surface contamination without porosity and can bridge gaps as wide as 3/8" (9mm). The electrodes can be bent without flux chipping and the slag can be welded over without removal.

Welding Techniques: Weld with a short to medium arc length at low amperage. When surface preparation is impratical, use a medium to long arc and favor high amperages. Multi-pass welds can be made without intermittent slag removal. Use any welding technique from stringer bead to wide weave.

SPECIFICATIONS

• AWS / ASME: A 5.1 E6010
• ELECTRODE DIAMETER: 1/8 In (3.18mm)
• ELECTRODE LENGTH: 14 In (355.6mm)
• PACKAGE QUANTITY: 10 Lbs (4.54 Kg)
• PACKAGING: Plastic container
• TYPICAL MECHANICAL PROPERTIES:
• TENSILE STRENGTH: 88,000 PSI (630 MPa)
• YIELD STRENGTH: 80,000 PSI (570 MPa)
• ELONGATION: 28%
• IMPACT ENERGY: 70J: -4° F (-20° C)
• RECOMMENDED CURRENT: DC Reverse (+), Straight (-), or AC
• MINIMUM - MAXIMUM AMPERAGE: 35 - 125
• WELDING POSITIONS: Flat, vertical up, vertical down, horizontal, overhead
• FLUX COLOR: Grey
• MINIMUM ORDER QUANTITY: Each
• ORDER QUANTITY: 4
• WARRANTY: Limited 30-Days (Free of defects in material and workmanship that may occur under normal use and care)

30 Days:

• 30 Days: Product: Free of defects in material and workmanship that may occur under normal use and care.