Easy Weld® 141 FC-i
Login to GOVX for your military discount. Applicable only on current offers.
DESCRIPTION
Tackle repairs, fabrication, and weekend projects anywhere you have power with the Forney® Easy Weld® 141 FC-i gasless flux-cored wire feed welder. It’s a compact inverter that runs on standard 120V household power yet delivers up to 140 amps of output, letting you weld from thin 24 ga sheet up to 1/4 in. mild steel in a single pass. With simple two-knob controls, lightweight inverter design, it is an easy-to-learn flux-cored welder for home use that still has the power and duty cycle to keep up with serious farm, garage, and jobsite repairs.
Key features & benefits:
- Expert-Tech® support gives you a direct line to Forney’s technical team for setup, troubleshooting, and parts- all from real welders based in Colorado, USA, so you are never on your own with this machine.
- CSA certified to meet strict safety and performance standards ensuring reliability and your safety in any work environment.
- 120V input power delivers plug-and-play convenience so you can weld anywhere there is a standard household circuit or compatible generator.
- Gasless flux-cored welder (FCAW) allows welding without the need for additional shielding gas so you can work outside, on the farm, or in windy conditions with fewer setup steps.
- Up to 140 amp output with 30% duty cycle at 90 amps delivers the power and arc time you need so you can weld 24 ga through 1/4 in. mild steel in a single pass.
- Small and lightweight 18.6 lb inverter design with carry strap delivers grab-and-go portability so you can weld where the work is instead of dragging material to the machine.
- Simple two-knob interface delivers intuitive setup so you can dial in voltage and wire feed speed quickly, even if you are new to flux-cored welding.
- 4 in. and 8 in. spool compatibility delivers flexibility so you can run small spools for quick jobs or larger spools for longer runs without frequent changeovers.
- Generator-capable operation (4,000 W continuous, no low-idle, 5% THD max) delivers remote welding capability so you can handle field repairs when grid power is not available.
- Integrated torch and Tweco®-style consumables deliver reliable electrical conductivity and easy access to industry-standard contact tips and nozzles so you can stay up and running.
Technical Specifications:
- Input voltage: 120 VAC, 50–60 Hz, single phase
- Input current: 13.4 A
- Output current range: Up to 140 A
- Output voltage range: 15.5–20 V
- Duty cycle: 30% at 90 A
- Process: Flux-Cored Arc Welding (FCAW), gasless only
- Wire diameter range: 0.030–0.035 in. flux-cored wire
- Single-pass plate thickness range: 24 ga–1/4 in. mild steel
- Power supply type: Inverter
- Input power cable length: 7 ft
- Torch length: 8 ft
- Ground cable length: 6 ft
- Spool gun capable: No
- Gas connection: None (flux-cored only)
- Spool compatibility: 4 in. and 8 in. wire spools
- Generator requirements: 4,000 W continuous output, no low-idle, 5% THD max
- Certification: CSA Listed
- IP rating: IP21S
- Machine weight: 18.6 lb (8.9 kg)
- Warranty: 1 year
These specs mean the Forney® Easy Weld® 141 FC-i plugs into standard 120V household power yet still provides enough output to weld up to 1/4 in. mild steel, covering many home, farm, and small-shop projects. The 30% duty cycle at 90 amps offers practical arc-on time for repeated welds on brackets, angle iron, and plate. With 0.030–0.035 in. flux-cored wire, 4 in. and 8 in. spool support, and an 18.6 lb build with a carry strap, it stays portable and productive around your property or jobsite.
Ideal for:
- Fixing gates, panels, and farm equipment around the ranch or homestead where a portable 120V welder is easier to move than the workpiece.
- Building and repairing trailers, brackets, racks, and general steel fabrication projects up to 1/4 in. thick.
- Automotive and 4x4 repairs such as patching frames, bumpers, and light fabrication in the driveway or garage.
- Home and hobby welding projects where a compact gasless flux-cored welder is preferred over managing shielding gas cylinders.
What’s included:
- Forney® Easy Weld® 141 FC-i flux-cored welder with 7 ft power cord
- 8 ft integrated MIG/flux-cored gun
- 6 ft ground clamp and lead
- 15 to 20 amp plug adapter
- Quick Start Guide (English, Spanish, French)
- Nylon carry strap
- 0.030/0.035 K drive roll (installed)
- 0.030 in. contact tip
- 0.035 in. contact tip
Warranty & support:
- Warranty: 1 year
- Expert-Tech® support: Access to Forney’s Colorado-based team of real welders for help with setup, troubleshooting, and repair questions throughout your equipment’s life.
Recommended accessories:
- Diffuser – ITEM# 85793, Tweco®-style diffuser
- Contact tip – ITEM# 60170, Tweco®-style 0.024 in. copper MIG contact tip for smooth wire feeding.
- Contact tip – ITEM# 60171, Tweco®-style 0.030 in. copper MIG contact tip, compatible with Forney® Easy Weld® and other Tweco-style MIG guns.
- Contact tip – ITEM# 60172, Tweco®-style 0.035 in. copper MIG contact tip, 4-pack, for reliable contact and clean arcs.
- Contact tip – ITEM# 60173, Tweco®-style copper contact tip for light to medium duty MIG welding where a standard 1 in. tip is required.
- Nozzle – ITEM# 85332, OEM MIG nozzle for focused shielding and spatter control on Forney® Easy Weld® guns.
- Nozzle – ITEM# 85336, Tweco®-style nozzle (21-50), 1/2 in. bore copper nozzle for general MIG and flux-cored welding applications.
- Nozzle – ITEM# 85337, Tweco®-style nozzle (21-62) variant designed for consistent shielding and heat resistance in everyday welding.
Forney®, Easy Weld® and Expert-Tech® are trademarks of Forney® Industries®, Inc. and may be registered in the United States and/or other countries. Forney® Industries green color is a federally registered trademark and cannot be reproduced unless authorized by Forney® Industries.
RESOURCES
WARRANTY
1 Year
- Easy Weld Inverter Based Machines: All internal electrical components that cannot be accessed without removing the cover.
For more warranty information, visit:Forney Industries Warranty Information