Easy Weld® Easy Cut™
DESCRIPTION
The Easy Weld® Easy Cut™ is a compact, beginner-friendly 20 amp plasma cutter that runs on standard 120V power, giving you clean, controlled cuts on common metals up to 3/16 in thick. This entry level plasma cutter helps you move beyond cutoff wheels and oxygen-acetylene cutting, with smoother cuts, less cleanup, and a fast, user-friendly learning curve for home garage and hobby projects.
Key features & benefits:
- 120V input power delivers plug-and-play convenience so you can use this beginner plasma cutter on a normal household circuit in your home garage.
- 10–20 amp output range delivers adjustable cutting power so you can dial in the arc for thin sheet, brackets, and small parts on steel and other common metals within the rated thickness.
- 3/16 in clean cut, 1/4 in sever rating delivers clean cuts on light steel so you can tackle small fab jobs, repairs, and metal art without excessive grinding.
- Inverter power supply delivers a compact, 13.2 lb portable plasma cutter so you can carry it to the work instead of wrestling material to a stationary tool.
- High-frequency torch with 13 ft lead delivers reliable arc starts and extra reach so you can move around a vehicle or workbench without constantly repositioning the machine.
- Integrated air regulator and moisture separator delivers consistent air supply and simpler setup so you can spend more time cutting and less time adjusting equipment.
Technical Specifications:
- Input voltage: 120 VAC, 50–60 Hz, single phase
- Input current: 14 A
- Output current range: 10–20 A (120 V)
- Duty cycle: 35% @ 20 A, 60% @ 16 A, 100% @ 12 A
- Power supply type: Inverter
- Cut rating, mild steel (120 V): 3/16 in clean cut; 1/4 in sever cut
- Input power cable length: 7 ft
- Torch Type: High-Frequency
- Torch length: 13 ft
- Ground cable length: 6 ft
- Recommended gas inlet pressure: 80–120 PSI (5.5–8.3 bar)
- Recommended gas flow rate: 5.5 cfm (156 l/min)
- Gas supply line minimum I.D.: 1/4 in
- IP rating: IP21S
- Certification: CSA- Certified to meet strict safety and performance standards for reliability and safety in any work environment.
- Machine dimensions (L×W×H): 17.75 in × 6.6 in × 10.2 in (451 mm × 168 mm × 260 mm)
- Machine weight: 13.2 lb (6 kg)
With 10–20 amps of output and a 3/16 in clean cut rating, the Easy Weld® Easy Cut™ is tuned for light fabrication, repair, and metal art on common metals within its thickness range. The 35% duty cycle at 20 A supports typical hobby cutting sessions without constant cooldowns, especially on 14 gauge and 3/16 in stock. Standard 120V input means most garages and small shops can power it without special wiring, while the inverter design keeps the unit compact and easy to store when space is tight. CSA certification and IP21S protection add confidence for use in typical indoor shop environments.
Ideal for:
- Entry level plasma cutter users who want cleaner cuts on 3/16 in or less metal in a home garage.
- DIY automotive and small fabrication projects where a compact 20 amp plasma cutter can replace cutoff wheels on light steel and other common metals.
- Occasional weekend projects, maintenance, and simple metal art that call for a beginner friendly plasma cutter instead of a full-size shop machine.
- Light repairs and hobby builds where a portable plasma cutter is easier to move around than material.
What’s included:
- Easy Weld® Easy Cut™ plasma cutter with 7 ft power cord
- 13 ft high-frequency plasma torch
- 6 ft ground clamp and lead
- 15 to 20 amp plug adapter
- Nylon carry strap
- Quick Start Guide (English/Spanish/French)
- One extra electrode and cutting tip
Warranty & support:
- Warranty: 1 year on power source; 90 days on torch.
- Backed by Forney’s U.S.-based Expert Tech™ service network for setup questions and troubleshooting.
Forney® Industries green color is a federally registered trademark and cannot be reproduced unless authorized by Forney® Industries. Easy Weld® and Easy Cut™ are trademarks of Forney® Industries®, Inc. and may be registered in the United States and/or other countries.
RESOURCES
WARRANTY
30 Days
- Product: Free of defects in material and workmanship that may occur under normal use and care.
90 Days
- Welder and Plasma Machines: MIG guns and plasma torches.
3 Years
- Forney Transformer Based Machines: All internal electrical components that cannot be accessed without removing the cover. The transformer and rectifiers are covered by the 5-year warranty.
- Forney Inverter Based Machines: All internal electrical components that cannot be accessed without removing the cover.
5 Years
- Forney Transformer Based Machines: Transformers and rectifiers.
For more warranty information, visit:Forney Industries Warranty Information